Conductive Level Rod-probes NS/NT

Conductive Level Rod-probes NS/NT

Description

Conductive Level Rod-probes NS/NT

  • Control of the maximum and minimum levels
  • With 2 to 5 rods for detection of 1 to 4 levels
  • With or without an integrated temperature sensor

Enables safe control and monitoring of the liquid level in tanks with level rod-probes.

NS/NT
Level rod-probes operate on a conductive principle, which means that they can be used only in electrically conductive liquids (conductivity >10 μS). Since these are purely passive devices, suitable electronic controllers are needed (ETS100, ENR200/300).


Accessories and Options

TERMINAL CASING BC
Material red terminal casing : PP, ref. BC
Material white terminal casing : PVDF, ref. BC/L

HB SUPPORT FOR BC CASING
Support screwed onto the tank rim, easy fitment of the terminal casing
For heaters with a maximum tube length of 800 mm
Material : PP

HOLDING SLEEVE HM FOR BC CASING
To fix the heater in the tank cross-beams, recommEnded for liquids with high temperature or with highly concentrated steam – drill-hole diameter from 70 to 76 mm, Material : EPDM

MOUNTING WRENCH SL FOR LC CASING
To open the LC casing and the cable-gland

HL SUPPORT FOR LC CASING
Support screwed onto the tank rim, easy fitment of the terminal casing
For heaters with LC casing
Material : PP

MOUNTING WRENCH SB FOR BC CASING
Universal Wrench

MOUNTING SLEEVE EM FOR BC CASING
For space-saving fitting in supports or tank cross-beams drill-hole diameter from 87 to 90 mm
Material : EPDM

TERMINAL CASING LC
Material red terminal casing : PP, ref. LC
Material white terminal casing : PVDF, ref. LC/L

MOUNTING SLEEVE ML FOR LC CASING
For space-saving fitting in supports or tank cross-beams drill-hole diameter 63 mm Material : EPDM


Downloadable support files:

Conductive level probe data sheet

Conductive level probe NS

Conductive level probe NT