GALVATHERM CYLINDRICAL ASSEMBLY TYPE P – Immersion Heater
- ‘All-plastic’ model
- Up to 15 kW
With feet included to raise the heating part from the bottom of the tank.
All plastic heater proposed with an 85 mm or an 120 mm outside diameter.
Assembly Type P
On a plastic rod structure (ø 20 mm) in PP or PVDF.
Standard configuration: heating cable coated Teflon® FEP and PP or PVDF rod frame.
For use at the bottom of the tank. Available for heaters with references beginning with C85 and C12.
Accessories and Options:
EXTRA LENGTH OF CABLES
Electrical cable C of type HO5 VV-F or HO7 RN-F. Non heating cable N to go out of the tank.
Perforated plastic trellis, in PP only for C85 and C12 heaters.
ref in PP : PRCPP
CABLE GLAND, 75MM DIAMETER
Allow 300 mm extra on the H length (H=installation height on N)
ref in PP : PEPP, ref in PVDF : PEPF