GALVATHERM FLAT ASSEMBLY TYPE D – Immersion Heater
- ‘All-plastic’ model
- Designed for small tank configurations and low powers
- From 0.5 kW
- Minimum bulk
‘All-plastic’ models particularly adapted to small tank configurations and low powers. Small overall dimensions as the structure follows the oval shape of the heating part.
Recommended up to 6 kW.
Assembly Type D
On plastic structure PVDF, PP or FEP.
Standard configuration: heating cable coated Teflon® FEP and frame with PP or PVDF strips.
For use at the bottom of the tank. Available for heaters with reference beginning with P30, P40 and P90.
Accessories and Options:
FEET FOR D
For installation at the bottom of the tank, feet in PP or PVDF (standard height 50 mm)
ref in PP : PIPP, ref in PVDF : PIPF
EXTRA LENGTH OF CABLES
Electrical cable C of type HO5 VV-F or HO7 RN-F. Non heating cable N to go out of the tank.
REMOVABLE GUARDS FOR D
Perforated plastic guard in PP or PVDF.
ref in PP : PRPPP, ref in PVDF : PRPPF
CABLE GLAND, 75MM DIAMETER
Allow 300 mm extra on the H length (H=installation height on N)
ref in PP : PEPP, ref in PVDF : PEPF