Description
Level probes – Float Switches MTSu MTSt PP-PVDF
- Based on the moving float
- With 1, 2 or 3 contacts
- With or without an integrated temperature sensor
Float switches offer a simple and economical solution to control and monitor liquid levels in tanks and containers.
MTSu/MTSt
A float switch is convenient for use in liquid process without encrustation. If not we recommend conductive level rod-probes.
Accessories and Options
TERMINAL CASING BC
Material red terminal casing : PP, ref. BC
Material white terminal casing : PVDF, ref. BC/L
HB SUPPORT FOR BC CASING
Support screwed onto the tank rim, easy fitment of the terminal casing
For heaters with a maximum tube length of 800 mm
Material : PP
HOLDING SLEEVE HM FOR BC CASING
To fix the heater in the tank cross-beams, recommended for liquids with high temperature or with highly concentrated steam – drill-hole diameter from 70 to 76 mm, Material : EPDM
MOUNTING WRENCH SL FOR LC CASING
To open the LC casing and the cable-gland
MOUNTING WRENCH SB FOR BC CASING
Universal Wrench
MOUNTING SLEEVE EM FOR BC CASING
For space-saving fitting in supports or tank cross-beams drill-hole diameter from 87 to 90 mm
Material : EPDM
TERMINAL CASING LC
Material red terminal casing : PP, ref. LC
Material white terminal casing : PVDF, ref. LC/L
MOUNTING SLEEVE ML FOR LC CASING
For space-saving fitting in supports or tank cross-beams drill-hole diameter 63 mm Material : EPDM
Downloadable support files:
leaflet-mts-stainless-steel-float-switches
operating-instructions-for-mts
operating-instructions-for-mts3u3x
